Chapter III · Complex numbers

Displacements, and how to multiply them

§§34–38 35 min

Displacements in the plane are added by the parallelogram rule; asking what their product should be leads, through similar triangles, to one inevitable formula.

Why this matters

Before there are complex numbers there must be something for them to be. Hardy’s answer is the displacement: a move in the plane, recorded by the pair of numbers [x,y][x, y]. Adding displacements is natural. Multiplying them is not, and this lesson follows Hardy’s argument that there is essentially one good way to do it. The formula that comes out, [x,y][x′,y′]=[xx′−yy′,  xy′+yx′][x, y][x', y'] = [xx' - yy',\; xy' + yx'], is the multiplication of complex numbers, discovered rather than postulated.

The idea

A real number xx can be read in several ways: as a length, as the label of a point on a line, or as a move along the line by xx units, forwards if x>0x > 0 and backwards if x<0x < 0. Hardy fixes on the last reading (§34). A move does not care where it starts: “three steps forward” is the same instruction wherever you stand. So the displacement from PP to QQ is determined by its length and its sense alone, and he writes it [x][x].

In the plane a move needs a direction as well. Two moves PQ‾\overline{PQ} and RS‾\overline{RS} are counted as the same displacement if PQPQ and RSRS are equal in length, parallel, and run the same way. Slide PQ‾\overline{PQ} so that it starts at the origin OO; it ends at a point A=(x,y)A = (x, y), and the pair [x,y][x, y] records the move completely. If P=(ξ,η)P = (\xi, \eta) and Q=(ξ′,η′)Q = (\xi', \eta') then PQ‾=[ξ′−ξ,  η′−η]\overline{PQ} = [\xi' - \xi,\; \eta' - \eta].

Adding two moves means doing one and then the other (§36). Draw the second one starting where the first one ended: the result is the diagonal of a parallelogram, and its coordinates are the sums of the coordinates.

Multiplying is a real question. Hardy asks what any sensible product of displacements should satisfy (§37):

  1. the product of two displacements is a displacement;
  2. it agrees with the multiplication by numbers we already have: a real number α\alpha is the move [α,0][\alpha, 0] along the axis, and [α,0][x,y][\alpha, 0][x, y] should be α[x,y]=[αx,αy]\alpha[x, y] = [\alpha x, \alpha y];
  3. it obeys the commutative, associative and distributive laws.

The obvious guess [x,y][x′,y′]=[xx′,yy′][x, y][x', y'] = [xx', yy'] fails rule 2 at once: it gives [α,0][x,y]=[αx,0][\alpha, 0][x, y] = [\alpha x, 0], not [αx,αy][\alpha x, \alpha y].

Hardy’s idea (§38) comes from similar triangles. Let A=(1,0)A = (1, 0) be the unit move. If triangles OABOAB and OCDOCD are similar, then OD/OC=OB/OAOD/OC = OB/OA, that is, OD=OB⋅OCOD = OB \cdot OC when OA=1OA = 1. So define the product OB‾⋅OC‾\overline{OB} \cdot \overline{OC} to be OD‾\overline{OD}, where DD is found by building on OCOC a triangle similar to OABOAB. There are two such triangles, mirror images of each other; take the one in which the angle CODCOD equals the angle AOBAOB with its sign, so that the triangles are similar in the same sense.

Explore Add, then multiply, two displacements

Try this. Start in Add mode and drag BB and CC: check that the sum is the far corner of the parallelogram. Switch to Multiply. Drag BB onto the positive xx-axis, then onto the negative xx-axis, and watch DD. Then switch on the triangle in the opposite sense and put CC on the xx-axis.

xy
  • OB (drag B)
  • OC (drag C)
  • OB + OC
Operation
OB‾=[1.4, 0.6],OC‾=[0.8, 1.3]\overline{OB} = [1.4,\, 0.6],\quad \overline{OC} = [0.8,\, 1.3]
Sum: [1.4, 0.6]+[0.8, 1.3]=[2.2, 1.9][1.4,\, 0.6] + [0.8,\, 1.3] = [2.2,\, 1.9]. Going along OB and then along a copy of OC ends at the same point as going along OC first: the two routes are the two halves of the parallelogram.
What to notice

When B=(α,0)B = (\alpha, 0) is on the axis, the triangle OABOAB is flat and DD is just CC stretched by α\alpha: rule 2 holds. In general DD is CC turned through the angle of BB and stretched by its length. The mirror-image triangle gives a point D′D' that, with C=(α,0)C = (\alpha, 0) on the axis, is BB reflected and stretched rather than α\alpha times BB, and that changes when you swap the roles of BB and CC. That is why the sense of the angle matters.

Precise statements

Definition Displacements and their equivalence Hardy: §§34–35 (1)

The displacement [x,y][x, y] is the move that carries the point (a,b)(a, b) to (a+x,b+y)(a + x, b + y), whatever (a,b)(a, b) is. The displacement from (ξ,η)(\xi, \eta) to (ξ′,η′)(\xi', \eta') is [ξ′−ξ,  η′−η][\xi' - \xi,\; \eta' - \eta], and

[x,y]=[x′,y′]if and only ifx=x′ and y=y′.[x, y] = [x', y'] \quad\text{if and only if}\quad x = x' \text{ and } y = y'.

The zero displacement [0,0][0, 0] is written 00.

Definition Multiplication by a number, addition, subtraction Hardy: §§35–36 (2), (3), (5)

For a real number α\alpha,

α[x,y]=[αx,αy],[x,y]+[x′,y′]=[x+x′,  y+y′],[x,y]−[x′,y′]=[x−x′,  y−y′].\alpha[x, y] = [\alpha x, \alpha y], \qquad [x, y] + [x', y'] = [x + x',\; y + y'], \qquad [x, y] - [x', y'] = [x - x',\; y - y'].

In particular [x,y]=[x,0]+[0,y][x, y] = [x, 0] + [0, y]: the displacement is the resultant of its two components along the axes.

Definition Product of two displacements Hardy: §38 (6)

Let A=(1,0)A = (1, 0), OB‾=[x,y]\overline{OB} = [x, y] and OC‾=[x′,y′]\overline{OC} = [x', y']. Construct on OCOC the triangle OCDOCD similar to OABOAB in the same sense. The product is OB‾⋅OC‾=OD‾\overline{OB} \cdot \overline{OC} = \overline{OD}. In coordinates,

[x,y] [x′,y′]=[ xx′−yy′,    xy′+yx′ ].[x, y]\,[x', y'] = [\,xx' - yy',\;\; xy' + yx'\,].
Theorem The product behaves like a product Hardy: §38

The product (6) satisfies Hardy’s three requirements: it is a displacement; [α,0][x,y]=[αx,αy][\alpha, 0][x, y] = [\alpha x, \alpha y]; and it is commutative, associative and distributive over addition.

Proofs

First, the geometric definition really does give the coordinate formula. The trick is to describe BB and CC by length and angle (polar coordinates), because similar triangles are about lengths and angles.

Proof From similar triangles to formula (6)
Strategy

Write BB and CC in polar coordinates. The similarity tells us the length and the angle of ODOD directly; then convert back with the addition formulas for cosine and sine.

Polar coordinates of BB and CC

Let B=(ρcos⁡θ, ρsin⁡θ)B = (\rho\cos\theta,\ \rho\sin\theta) and C=(σcos⁡ϕ, σsin⁡ϕ)C = (\sigma\cos\phi,\ \sigma\sin\phi), so x=ρcos⁡θx = \rho\cos\theta, y=ρsin⁡θy = \rho\sin\theta, x′=σcos⁡ϕx' = \sigma\cos\phi, y′=σsin⁡ϕy' = \sigma\sin\phi.

The length of ODOD is ρσ\rho\sigma

Similarity of OCDOCD and OABOAB gives OD/OC=OB/OAOD/OC = OB/OA. With OA=1OA = 1, OB=ρOB = \rho and OC=σOC = \sigma, this is OD=ρσOD = \rho\sigma.

The angle of ODOD is θ+ϕ\theta + \phi

The angle CODCOD equals the angle AOBAOB, which is θ\theta, with the same sign (same sense). Since OCOC makes the angle ϕ\phi with the axis, ODOD makes the angle ϕ+θ\phi + \theta.

Convert back to coordinates

D=(ρσcos⁡(θ+ϕ), ρσsin⁡(θ+ϕ))D = (\rho\sigma\cos(\theta + \phi),\ \rho\sigma\sin(\theta + \phi)). Expanding, ρσcos⁡(θ+ϕ)=ρcos⁡θ σcos⁡ϕ−ρsin⁡θ σsin⁡ϕ=xx′−yy′\rho\sigma\cos(\theta + \phi) = \rho\cos\theta\,\sigma\cos\phi - \rho\sin\theta\,\sigma\sin\phi = xx' - yy' and ρσsin⁡(θ+ϕ)=ρsin⁡θ σcos⁡ϕ+ρcos⁡θ σsin⁡ϕ=yx′+xy′\rho\sigma\sin(\theta + \phi) = \rho\sin\theta\,\sigma\cos\phi + \rho\cos\theta\,\sigma\sin\phi = yx' + xy'.

Now the laws. Each one is a short computation with (6), and the polar picture from the last proof (“lengths multiply, angles add”) makes two of them obvious.

Proof The product satisfies the requirements of §37
Strategy

Check each requirement against the formula [x,y][x′,y′]=[xx′−yy′, xy′+yx′][x, y][x', y'] = [xx' - yy',\ xy' + yx'], using polar form for associativity.

It is a displacement, and agrees with multiplication by numbers

The right-hand side is a pair of real numbers. With [x,y]=[α,0][x, y] = [\alpha, 0] it is [αx′−0, αy′+0]=[αx′,αy′]=α[x′,y′][\alpha x' - 0,\ \alpha y' + 0] = [\alpha x', \alpha y'] = \alpha[x', y'].

Commutative

Swapping (x,y)(x, y) with (x′,y′)(x', y') turns xx′−yy′xx' - yy' into x′x−y′yx'x - y'y and xy′+yx′xy' + yx' into x′y+y′xx'y + y'x: the same numbers.

Distributive

For fixed [x,y][x, y], both coordinates of the product are linear in (x′,y′)(x', y'). So multiplying [x,y][x, y] by [x′+x′′, y′+y′′][x' + x'',\ y' + y''] gives the sum of the products with [x′,y′][x', y'] and with [x′′,y′′][x'', y''].

Associative

By the first proof, multiplying by OB‾\overline{OB} multiplies lengths by OBOB and adds the angle of OBOB. In (OB‾⋅OC‾)⋅OE‾(\overline{OB}\cdot\overline{OC})\cdot\overline{OE} and in OB‾⋅(OC‾⋅OE‾)\overline{OB}\cdot(\overline{OC}\cdot\overline{OE}) the length is OB⋅OC⋅OEOB \cdot OC \cdot OE and the angle is the sum of the three angles, in either order. Points with equal lengths and equal angles are equal.

Explore Multiplication as rotate and scale

Try this. In Multiply mode, keep BB fixed and drag CC around a full circle about OO. Then put BB at (0,1)(0, 1).

xy
  • triangle OAB, A = (1, 0)
  • OC (drag C)
  • triangle OCD, similar to OAB
OB‾=[0.9, 0.9],OC‾=[1.6, 0.4]\overline{OB} = [0.9,\, 0.9],\quad \overline{OC} = [1.6,\, 0.4]
OD=OB⋅OC=1.27×1.65=2.1OD = OB\cdot OC = 1.27 \times 1.65 = 2.1; angle COD=AOB=45∘COD = AOB = 45^\circ.
Product: OD‾=[xx′−yy′,  xy′+yx′]=[1.08, 1.8]\overline{OD} = [xx' - yy',\; xy' + yx'] = [1.08,\, 1.8]
What to notice

For a fixed BB, the point DD is always CC turned through the angle AOBAOB and stretched by the factor OBOB; the purple triangle is a scaled, turned copy of the blue one. With B=(0,1)B = (0, 1) the rule is a pure quarter turn, which is the first hint of ii in the next lesson.

Worked examples and exercises

Exercise ●○○ Hardy: Examples XX, 1 (ii), (v)

Prove that addition of displacements is associative, and that α{[x,y]+[x′,y′]}=α[x,y]+α[x′,y′]\alpha\{[x, y] + [x', y']\} = \alpha[x, y] + \alpha[x', y']. Say what each law means geometrically.

Hint
Reduce each side to a single bracket using the definitions, then compare coordinates.

Solution

Associativity. ([x,y]+[x′,y′])+[x′′,y′′]=[(x+x′)+x′′, (y+y′)+y′′]([x, y] + [x', y']) + [x'', y''] = [(x + x') + x'',\ (y + y') + y''] and [x,y]+([x′,y′]+[x′′,y′′])=[x+(x′+x′′), y+(y′+y′′)][x, y] + ([x', y'] + [x'', y'']) = [x + (x' + x''),\ y + (y' + y'')]. The coordinates agree because addition of real numbers is associative. Geometrically: making three moves one after another lands you at the same point however you group them.

Distributivity. α([x,y]+[x′,y′])=α[x+x′,y+y′]=[αx+αx′, αy+αy′]=[αx,αy]+[αx′,αy′]\alpha([x, y] + [x', y']) = \alpha[x + x', y + y'] = [\alpha x + \alpha x',\ \alpha y + \alpha y'] = [\alpha x, \alpha y] + [\alpha x', \alpha y']. Geometrically: enlarging a parallelogram from OO by the factor α\alpha gives a parallelogram, so the enlarged diagonal is the diagonal of the enlarged sides.

Exercise Dividing a segment in a given ratio ●○○ Hardy: Examples XX, 2

If MM divides PQPQ so that PM:MQ=μ:λPM : MQ = \mu : \lambda (with λ+μ≠0\lambda + \mu \ne 0), show that OM‾=λλ+μ OP‾+μλ+μ OQ‾\overline{OM} = \dfrac{\lambda}{\lambda + \mu}\,\overline{OP} + \dfrac{\mu}{\lambda + \mu}\,\overline{OQ}. What does this say for the midpoint?

Hint
OM‾=OP‾+PM‾\overline{OM} = \overline{OP} + \overline{PM}, and PM‾\overline{PM} is a known multiple of PQ‾=OQ‾−OP‾\overline{PQ} = \overline{OQ} - \overline{OP}.

Solution

Since MM lies on PQPQ with PM:MQ=μ:λPM : MQ = \mu : \lambda, we have PM‾=μλ+μ PQ‾\overline{PM} = \frac{\mu}{\lambda + \mu}\,\overline{PQ}. Hence OM‾=OP‾+μλ+μ(OQ‾−OP‾)=λλ+μOP‾+μλ+μOQ‾.\overline{OM} = \overline{OP} + \frac{\mu}{\lambda + \mu}(\overline{OQ} - \overline{OP}) = \frac{\lambda}{\lambda + \mu}\overline{OP} + \frac{\mu}{\lambda + \mu}\overline{OQ}. For the midpoint, λ=μ\lambda = \mu and OM‾=12(OP‾+OQ‾)\overline{OM} = \tfrac12(\overline{OP} + \overline{OQ}): the midpoint’s coordinates are the averages of the endpoints’ coordinates.

Exercise Centre of mass ●○○ Hardy: Examples XX, 3

Equal particles sit at P1,…,PnP_1, \dots, P_n, and GG is their centre of mass. Show that OG‾=1n(OP1‾+⋯+OPn‾)\overline{OG} = \frac1n(\overline{OP_1} + \dots + \overline{OP_n}), and deduce that GP1‾+⋯+GPn‾=0\overline{GP_1} + \dots + \overline{GP_n} = 0.

Hint
The centre of mass of equal masses has as coordinates the averages of their coordinates. For the second part take O=GO = G.

Solution

The centre of mass of equal particles at (xk,yk)(x_k, y_k) is (1n∑xk, 1n∑yk)(\frac1n\sum x_k,\ \frac1n\sum y_k), which is exactly the coordinate form of OG‾=1n∑OPk‾\overline{OG} = \frac1n\sum \overline{OP_k}. Since this holds for every choice of origin, take the origin at GG itself: then OG‾=0\overline{OG} = 0, so ∑GPk‾=0\sum \overline{GP_k} = 0. (Directly: GPk‾=OPk‾−OG‾\overline{GP_k} = \overline{OP_k} - \overline{OG}, and summing gives ∑OPk‾−n OG‾=0\sum \overline{OP_k} - n\,\overline{OG} = 0.)

Exercise Coordinates along two directions are unique ●●○ Hardy: Examples XX, 5

Let AB‾\overline{AB} and AC‾\overline{AC} be two displacements that are not in the same straight line. Show that if α AB‾+β AC‾=γ AB‾+δ AC‾\alpha\,\overline{AB} + \beta\,\overline{AC} = \gamma\,\overline{AB} + \delta\,\overline{AC} then α=γ\alpha = \gamma and β=δ\beta = \delta.

Hint
Move everything to one side: (α−γ)AB‾=(δ−β)AC‾(\alpha - \gamma)\overline{AB} = (\delta - \beta)\overline{AC}. What does it mean if a multiple of one is a multiple of the other?

Solution

The hypothesis gives (α−γ) AB‾=(δ−β) AC‾(\alpha - \gamma)\,\overline{AB} = (\delta - \beta)\,\overline{AC}. If α≠γ\alpha \ne \gamma we could divide: AB‾=δ−βα−γ AC‾\overline{AB} = \frac{\delta - \beta}{\alpha - \gamma}\,\overline{AC}, so BB would lie on the line ACAC, contrary to hypothesis. Hence α=γ\alpha = \gamma, so (δ−β)AC‾=0(\delta - \beta)\overline{AC} = 0; since AC‾≠0\overline{AC} \ne 0 (C≠AC \ne A, as the displacements are not collinear), δ=β\delta = \beta. In words: every displacement can be written as a combination of two non-parallel ones in only one way, which is what makes “equate coefficients” a valid step in the next exercise.

Exercise A trisection in a parallelogram ●●○ Hardy: Examples XX, 7

ABCDABCD is a parallelogram and MM is the midpoint of ABAB. Show that DMDM trisects ACAC and is trisected by it.

Hint
Put b=AB‾\mathbf b = \overline{AB} and d=AD‾\mathbf d = \overline{AD}, so AC‾=b+d\overline{AC} = \mathbf b + \mathbf d and AM‾=12b\overline{AM} = \frac12\mathbf b. Write the general point of each line in terms of b\mathbf b and d\mathbf d.
Hint
A point of ACAC is t(b+d)t(\mathbf b + \mathbf d); a point of DMDM is d+s(12b−d)\mathbf d + s(\tfrac12\mathbf b - \mathbf d). Equate the coefficients of b\mathbf b and d\mathbf d, using the last exercise.

Solution

With AA as origin, the intersection PP satisfies tb+td=s2b+(1−s)dt\mathbf b + t\mathbf d = \tfrac{s}{2}\mathbf b + (1 - s)\mathbf d. As b\mathbf b and d\mathbf d are not parallel, the coefficients agree: t=s/2t = s/2 and t=1−st = 1 - s. So s=23s = \tfrac23 and t=13t = \tfrac13. Thus AP=13ACAP = \tfrac13 AC (DMDM cuts off a third of ACAC) and DP=23DMDP = \tfrac23 DM, so PM=13DMPM = \tfrac13 DM (ACAC cuts off a third of DMDM).

Exercise Commutativity from the picture ●●○ Hardy: §38, Example

Show directly from the geometric definition, without coordinates, that OB‾⋅OC‾=OC‾⋅OB‾\overline{OB}\cdot\overline{OC} = \overline{OC}\cdot\overline{OB}.

Hint
OB‾⋅OC‾=OD‾\overline{OB}\cdot\overline{OC} = \overline{OD} with OCDOCD similar to OABOAB. The other product is OD1‾\overline{OD_1} with OBD1OBD_1 similar to OACOAC. Show D1=DD_1 = D by checking that triangle OBDOBD is similar to OACOAC.

Solution

Let OCDOCD be similar to OABOAB in the same sense, so OD/OC=OB/OAOD/OC = OB/OA and angle CODCOD = angle AOBAOB. Compare triangles OBDOBD and OACOAC. Their angles at OO: angle BODBOD = angle BOCBOC + angle CODCOD = angle BOCBOC + angle AOBAOB = angle AOCAOC (signed angles add). Their sides at OO: OD/OB=OC/OAOD/OB = OC/OA, which is the same proportion OD⋅OA=OB⋅OCOD \cdot OA = OB \cdot OC read the other way. Two triangles with one equal angle and the including sides in proportion are similar (here in the same sense), so OBDOBD is similar to OACOAC. But OC‾⋅OB‾\overline{OC}\cdot\overline{OB} is defined as OD1‾\overline{OD_1} with OBD1OBD_1 similar to OACOAC in the same sense, and that triangle is unique. Hence D1=DD_1 = D.

Check yourself

Check yourself Choose one

P=(1,2)P = (1, 2), Q=(4,3)Q = (4, 3), R=(−2,0)R = (-2, 0), S=(1,1)S = (1, 1). Which is true?

Why

A displacement ignores its point of application: only length, direction and sense count, and these are recorded by the differences of coordinates, [4−1,3−2]=[3,1][4 - 1, 3 - 2] = [3, 1] and [1−(−2),1−0]=[3,1][1 - (-2), 1 - 0] = [3, 1]. The third option confuses the displacement with the coordinates of its end point; that is only right when the start is OO.

Check yourself Choose one

Why does Hardy reject the definition [x,y][x′,y′]=[xx′,yy′][x, y][x', y'] = [xx', yy']?

Why

The componentwise product is commutative, associative and distributive, and it is a pair of numbers, so it passes every test except one: it is inconsistent with the multiplication by real numbers we already had, once the real number α\alpha is identified with the move [α,0][\alpha, 0]. Requirement 2 is what forces the rotation into the definition.

Check yourself Enter a number

Compute the first coordinate of [1,2] [1,3][1, 2]\,[1, 3].

Why

By (6) the product is [1⋅1−2⋅3, 1⋅3+2⋅1]=[−5,5][1\cdot 1 - 2\cdot 3,\ 1\cdot 3 + 2\cdot 1] = [-5, 5]. The minus sign in xx′−yy′xx' - yy' comes from the angle addition formula for cosine; in the next lesson it becomes i2=−1i^2 = -1.

Check yourself True or false?

In the construction of the product, it does not matter which of the two triangles on OCOC similar to OABOAB we choose.

Why

False. The mirror-image triangle gives the point D′D' with length OB⋅OCOB\cdot OC and angle (angle of CC) −- (angle of BB). That “product” is not commutative (swapping BB and CC reflects D′D' in the axis), and when C=(α,0)C = (\alpha, 0) is on the axis it gives D′=(αx,−αy)D' = (\alpha x, -\alpha y) instead of α[x,y]\alpha[x, y], so it cannot agree with multiplication by real numbers. The widget’s “opposite sense” switch shows both failures.

Hardy’s language

increasing experience of mathematics will reveal to him the great importance of distinguishing clearly between things which, however intimately connected, are not the same.

— G. H. Hardy, §34

Summary

Summary
  • A displacement [x,y][x, y] is a move in the plane; moves with the same length, direction and sense are equal, wherever they start.
  • Addition is “one move after the other”: the parallelogram rule, [x,y]+[x′,y′]=[x+x′,y+y′][x, y] + [x', y'] = [x + x', y + y'].
  • A good product must agree with multiplication by real numbers and obey the usual laws. Similar triangles in the same sense give one: lengths multiply and angles add.
  • In coordinates, [x,y][x′,y′]=[xx′−yy′, xy′+yx′][x, y][x', y'] = [xx' - yy',\ xy' + yx']. The next lesson renames [x,y][x, y] as x+yix + yi.