Two curves can meet at a point by crossing, by touching, or by touching “very closely”. §155 turns this into a number, the order of contact, using Taylor’s theorem: the more derivatives agree, the faster the gap between the curves closes. The tangent line is the straight line of closest contact; asking for one more order of contact defines points of inflexion; and the circle of closest contact, the circle of curvature, gives the curvature of a curve, the basic quantity of differential geometry.
The idea
Let two curves y=f(x) and y=ϕ(x) pass through the same point P with abscissa ξ. Move a distance h to the right and measure the vertical gap QR=ϕ(ξ+h)−f(ξ+h) between them. If the curves merely cross, the gap is of the order of h. If they touch (same tangent), Taylor’s theorem shows the gap is of the order of h2. If also their second derivatives agree, it is of the order of h3, and so on. The rate at which the gap closes is a measure of how closely the curves cling together.
There is a practical way to read off that rate: halve h. A gap of order hk shrinks by a factor of about 2k.
ExploreHalve h and watch the gap
Try this.On the parabola y=x2, compare with the tangent, then the circle, and read the last column of the table. Then put ξ=0 with the circle. Finally choose y=x3−x at ξ=0 and compare with the tangent.
y=x2 at ξ=0.6 compared with its tangent line
xy
y = x²
tangent line
gap QR at x = ξ + h
point of contact P
Compare with
h
gap QR
gap(h) / gap(h/2)
0.5
0.25
4
0.25
0.0625
4
0.125
0.01563
4
0.0625
0.003906
Halving h divides the gap by about 22, so the gap is of order h2: contact of order 1.
What to notice
Against the tangent the gap ratio is about 4=22 (order h2, contact of order 1). Against the circle of curvature it is about 8 (contact of order 2), except at the vertex ξ=0, where it jumps to 16: the circle fits unusually well there. At the inflexion of x3−x the tangent itself achieves ratio 8: the line crosses the curve while hugging it to second order.
Precise statements
DefinitionContact of the n-th orderHardy: §155
Let f and ϕ have derivatives of all the orders needed at x=ξ. If
the curves y=f(x) and y=ϕ(x) have contact of the n-th order at the point with abscissa ξ. Contact of the first order is simply touching: a common point and a common tangent.
TheoremOrder of contact and the size of the gapHardy: §155
If the curves have contact of the n-th order at ξ, then
So the gap is of exactly the (n+1)-th order of smallness in h.
Two special cases recur constantly.
DefinitionTangent and point of inflexionHardy: Examples LIX, 1–2
The tangent to y=f(x) at ξ is the line with contact of order at least 1: y−f(ξ)=(x−ξ)f′(ξ). A point where the tangent has contact of order at least 2, that is, where f′′(ξ)=0, is a point of inflexion.
DefinitionCircle of curvatureHardy: Examples LIX, 8
If f′′(ξ)=0, there is exactly one circle with contact of order at least 2 with y=f(x) at (ξ,η). Writing η1=f′(ξ) and η2=f′′(ξ), its centre (a,b) and radius ρ are
It is the circle of curvature, ρ is the radius of curvature, and 1/ρ (often with the sign of η2) is the curvature.
Hardy points out a weakness of the definition: it depends on the axes, because it uses y as a function of x, and it breaks down when the tangent is vertical. The cure is to describe curves parametrically, x=x(t), y=y(t); the order of contact then turns out to be a geometric invariant. We stay with the simple version.
Proofs
ProofOrder of contact and the size of the gap
Strategy
Apply Taylor’s theorem in the form of §151 to the difference g=ϕ−f. Contact of order n means precisely that g and its first n derivatives vanish at ξ.
The difference vanishes to order n
Let g(x)=ϕ(x)−f(x). By hypothesis g(ξ)=g′(ξ)=⋯=g(n)(ξ)=0 and g(n+1)(ξ)=0.
Expand g
By §151 with n+1 in place of n, g(ξ+h)=(n+1)!hn+1{g(n+1)(ξ)+η} with η→0.
Divide by hn+1
g(ξ+h)/hn+1={g(n+1)(ξ)+η}/(n+1)!→g(n+1)(ξ)/(n+1)!, which is not zero. This is the statement. In particular, halving h divides the gap by a factor tending to 2n+1, which is what the widget measures.
∎
ProofThe circle of curvature
Strategy
Write the circle as (x−a)2+(y−b)2=ρ2, differentiate twice, and require that y, y′ and y′′ take the values η,η1,η2 of the curve at x=ξ. Three conditions fix the three unknowns a, b, ρ.
Differentiate the equation of the circle
Along the circle, y is a function of x (on the arc through the point) and
(x−a)+(y−b)y′=0,1+y′2+(y−b)y′′=0.
Impose second-order contact
Put x=ξ, y=η, y′=η1, y′′=η2. The second equation gives η−b=−(1+η12)/η2, so b=η+(1+η12)/η2. The first gives ξ−a=−(η−b)η1=η1(1+η12)/η2, so a=ξ−η1(1+η12)/η2.
Find the radius
ρ2=(ξ−a)2+(η−b)2=η22(1+η12)2(η12+1), so ρ=(1+η12)3/2/∣η2∣. This needs η2=0; at a point of inflexion the “circle” degenerates into the tangent line.
∎
The circle of curvature usually has contact of exactly order 2; it sits on the curve and, typically, crosses it. At special points (the vertices of a conic, for instance) the third derivatives agree as well, and the contact is of order 3.
ExploreCurvature along an ellipse
Try this.Slide ξ along the upper half of the ellipse 41x2+y2=1 and watch the circle of curvature and its radius. Stop at ξ=0 and read the order of contact.
41x2+y2=1 at ξ=0.8 compared with its circle of curvature
xy
ellipse x²/4 + y² = 1 (upper half)
circle of curvature
gap QR at x = ξ + h
point of contact P
Compare with
h
gap QR
gap(h) / gap(h/2)
0.5
0.005173
9.962
0.25
0.0005193
8.798
0.125
5.902 × 10⁻⁵
8.366
0.0625
7.055 × 10⁻⁶
Centre (0.096,−2.31), radius of curvature ρ=3.302, curvature 1/ρ=0.3028. Halving h divides the gap by about 23.06, so the gap is of order h3: contact of order 2.
What to notice
The circle is largest at the top, the flattest point (ρ=4), and shrinks towards the ends of the major axis, where the ellipse turns sharply. At ξ=0, an end of an axis, the gap ratio jumps from about 8 to about 16: there the circle has contact of order 3. The ends of the axes are the only such points on an ellipse (Misc. Ex. 10 of this chapter).
Worked examples and exercises
ExercisePoints of inflexion●○○Hardy: Examples LIX, 3
Find the points of inflexion of y=3x4−6x3+1, y=2x/(1+x2), y=sinx, y=tanx and y=arctanx.
Hint
Solve f′′(x)=0, and check that f′′ really changes sign (so that the tangent crosses the curve).
Solution
f′′=36x2−36x=36x(x−1): inflexions at (0,1) and (1,−2).
f′=2(1−x2)/(1+x2)2 and f′′=4x(x2−3)/(1+x2)3: inflexions at (0,0) and (±3,±213).
f′′=−sinx: inflexions at x=kπ, on the axis.
f′′=2sec2xtanx: inflexions at x=kπ.
f′′=−2x/(1+x2)2: one inflexion, at the origin.
In each case f′′ changes sign at the point (and f′′′=0 there), so the tangent has contact of order exactly 2 and crosses the curve.
Verify that a circle of radius c has curvature 1/c at every point. Then show that a curve y=f(x) whose curvature f′′/(1+f′2)3/2 is a non-zero constant 1/c is an arc of a circle of radius c.
Hint
For the converse, put p=f′. Then p′/(1+p2)3/2=1/c. Integrate: what is the derivative of p/1+p2?
Solution
For the lower semicircle y=−c2−x2 we get y′=x/c2−x2, 1+y′2=c2/(c2−x2) and y′′=c2/(c2−x2)3/2, so y′′/(1+y′2)3/2=1/c. (For the upper semicircle the sign changes.)
Conversely, let p=f′, so p′/(1+p2)3/2=1/c. Since dxd1+p2p=(1+p2)3/2p′, we get p/1+p2=(x−a)/c for a constant a. Solving, p=(x−a)/c2−(x−a)2, and integrating once more, y=b−c2−(x−a)2. So (x−a)2+(y−b)2=c2: an arc of a circle of radius c.
ExerciseCurvature of the parabola●●○Hardy: Examples LIX, 10
Find the centre and radius of curvature at any point of the parabola y2=4ax (a>0), and the radius at the vertex.
Hint
On the upper half, y=2ax, so η1=a/x and η2=−21ax−3/2.
Solution
With η1=a/x, 1+η12=(x+a)/x and η2=−21ax−3/2:
ρ=21ax−3/2((x+a)/x)3/2=a2(x+a)3/2.
The centre is ac=x−η1(1+η12)/η2=x+2(x+a)=3x+2a and bc=y+(1+η12)/η2=2ax−2x(x+a)/a=−2x3/2/a; by symmetry the lower half gives bc=+2x3/2/a. As x→0 the radius tends to 2a, the radius of curvature at the vertex. (At the vertex itself the tangent is vertical and Hardy’s formula cannot be used directly; treating x=y2/4a as a function of y gives ρ=2a at once.)
ExerciseConics have no inflexions●●●Hardy: Examples LIX, 4
Show that a non-degenerate conic ax2+2hxy+by2+2gx+2fy+c=0 has no point of inflexion.
Hint
Differentiate the equation twice implicitly. At an inflexion y′′=0; what equation does that give for y′?
Solution
Write X=ax+hy+g and Y=hx+by+f (half the partial derivatives of the left side). Differentiating, X+Yy′=0, and again, a+2hy′+by′2+Yy′′=0. At an inflexion y′′=0, so a+2hy′+by′2=0 with y′=−X/Y, that is aY2−2hXY+bX2=0. Expanding (Hardy’s computation) gives (ab−h2){ax2+2hxy+by2+2gx+2fy}+af2−2fgh+bg2=0. On the conic, the brace equals −c, so the point would satisfy −c(ab−h2)+af2−2fgh+bg2=0, that is abc+2fgh−af2−bg2−ch2=0. That is exactly the condition for the conic to split into two lines. So a non-degenerate conic has no inflexion.
Check yourself
Check yourselfEnter a number
What is the radius of curvature of y=x2 at the origin?
Why
η1=0 and η2=2, so ρ=(1+0)3/2/2=21. The circle of curvature is x2+(y−21)2=41. Check it in the first widget.
Check yourselfChoose one
Near a point P, halving h divides the gap between two touching curves by about 8. What is their order of contact at P?
Why
A factor 8=23 means the gap is of order h3, and contact of order n gives a gap of order hn+1. So n=2: the curves share value, first and second derivatives at P, but not the third.
Check yourselfTrue or false?
At a point of inflexion, the tangent has contact of order at least 2 with the curve, and yet (typically) crosses it there.
Why
True. If f′′(ξ)=0 and f′′′(ξ)=0, the gap between the curve and its tangent is about 61f′′′(ξ)h3, which changes sign with h. Close contact and crossing are compatible: what matters for crossing is whether the order of the gap is odd or even, as in the test for maxima and minima.
Check yourselfChoose one
Why does Hardy call his definition of contact unsatisfactory in general?
Why
At a point with vertical tangent, such as the vertex of y2=4ax, f′ does not exist, so the definition cannot be applied. Using a parameter t for both coordinates removes the dependence on the axes; Hardy refers to Fowler’s tract for that theory.
Hardy’s language
Summary
Summary
Contact of order n at ξ: values and first n derivatives agree, the (n+1)-th do not.
Then the gap ϕ(ξ+h)−f(ξ+h) is of exact order hn+1 (Taylor’s theorem applied to ϕ−f). Halving h divides it by about 2n+1.
The tangent has contact of order ≥1; where it has order ≥2 (f′′(ξ)=0), there is a point of inflexion.
The circle of curvature has contact of order ≥2; its radius is ρ=(1+f′2)3/2/∣f′′∣.